10 May How to Accurately Measure Your Whitley Bay Home for New Windows?

If you want to buy new windows for your home in Whitley Bay, you first need to take accurate measurements. Whether you are upgrading your windows to save more energy and more money on your bills or you want to refresh your home’s curb appeal, correct measurements are necessary. Below, we will help you learn how to measure for new windows in Whitley Bay and throughout North Tyneside.

Why you must measure for new windows correctly

Measuring your windows correctly ensures that your new windows will fit perfectly in the space where your old windows were. A window that is too small will leave gaps around it, which can affect its appearance and energy efficiency. On the other hand, a window that is too big will not fit in the space at all.

If you want to save money, you must be sure your measurements are correct. That way, your new windows in Whitley Bay will fit perfectly the first time they are installed.

Here’s what you need to measure windows:

Before you start measuring, you need to get some tools. You will need a metal measuring tape, a notepad and a pencil to write down the sizes as you measure, and a ladder if you have to measure windows that are high up.

If you can, we also recommend asking someone for help. This will make your job easier and safer, especially when you use the ladder or need someone to hold the end of the measuring tape.

Step 1: Measure in millimetres.

You should always use millimetres when measuring for new windows in Whitley Bay. This metric measurement is standard in the window industry in the UK. It’s easier and more accurate since there’s no need to convert measurements from inches to millimetres, and these conversions can sometimes cause mistakes.

Step 2: Ignore the old frame.

Don’t measure the old window frames, as they can change shape or become damaged over time, which can affect your measurements. Instead, look at the space in the wall where the new window will be installed. This is usually the masonry or brickwork around the window.

Step 3: Measure from the outside.

For the most accurate measurement, measure the window from the outside of your house. If you need to use a ladder, be careful. Better yet, ask someone to hold the ladder.  

Step 4: Measure width and height.

Now, you need to measure how wide and tall your window opening is. Do this by measuring from one side of the brick to the other side at the top, middle, and bottom of the opening. Record the smallest measurement because that’s the size you need. Do the same thing for the height. Measure from the top to the bottom at the left, middle, and right sides, and record the smallest measurements to ensure the best fit. 

Step 5: Subtract space for fitting.

When you have your measurements, subtract 10 mm from your smallest height and width measurements. This extra space is necessary for making any necessary adjustments during installation. This 10 mm gap will ensure your new window sits flat in the wall.

Step 6: Measure the depth of the window opening.

You also need to measure the depth of the window opening. Measure from the outside to the inside wall at multiple points to find the average depth. If the new window is too deep, it will not fit in the wall properly. 

Step 7: Double-check your measurements.

Always measure everything twice because even a tiny mistake can be costly. Confirming your measurements helps you be sure that your sizes are correct before you order your new windows in Whitley Bay. 

Looking for new windows in Whitley Bay?

If you are looking for new windows for your home, Priory Windows and Conservatories can help. We have over 25 years of experience supplying and fitting high-quality windows in Whitley Bay and offer a range of options that can be custom-fitted to your exact requirements. If you have any questions, call us on 0191 251 2999 or contact us online.